Swedish corrosion protection · Irish support

Armour for
the unseen.

Build the right cavity and underbody protection system for your vehicle, then buy every compatible product in one clear journey.

Official Irish distributor Technical guidance by product DIY and professional systems
The protection system

Three steps. One purpose.

Every treatment follows the same three steps. Choose by protection area below, or start with the products for each step.

  1. Prepare the surfaceClean, dry and inspect before application.
  2. Protect the cavitiesA creeping cavity wax for sills, box sections and seams.
  3. Protect the underbodyA stone-chip or underbody coating on the exposed metal, then top up over time.

The coating is only part of the job.

Before choosing an underbody protection product, you need to know the condition of the metal beneath any existing coating.

This vehicle had previously been coated over existing rust. Corrosion progressed beneath the coating, and the vehicle was eventually written off because the damage was too severe to repair.

Our inspection found that the first two stages of any proper treatment had been skipped: the underbody was never cleaned and the existing rust was never removed. The coating was applied straight over it, and the products used were not suitable for the job. Sealed in under the wrong coating, the corrosion spread faster than it would have on an untreated vehicle.

Previous treatment, vehicle subsequently written off
Corrosion found following a previous treatment. Preparation stages were skipped and unsuitable products were used.

Inspect the surface, address existing corrosion and follow the preparation requirements for the selected protection system. If you are unsure about an existing coating or the condition underneath it, get advice before applying more product.

For the motor trade

Stock it. Apply it. Stand behind it.

Body shops, parts businesses and professional applicators can talk directly to the Irish Auson distributor about products, equipment and technical support.

Open a trade conversation
  • Volume and reseller enquiries
  • Professional pump and application systems
  • Technical data and product matching
  • Irish support from the official distributor